Wholesale Pvc Coated Welded Wire Mesh Panels Company
PVC coated welded wire mesh panels are fabricated by electrically welding low‑carbon steel wires at each intersection, then applying a uniform polyvinyl chloride layer over the entire surface. This
Wholesale PVC Coated Welded Wire Mesh Panels
PVC coated welded wire mesh panels are fabricated by electrically welding low‑carbon steel wires at each intersection, then applying a uniform polyvinyl chloride layer over the entire surface. This two‑step process creates a barrier that resists corrosion while maintaining the structural integrity of the welded grid.
Overview
The product is supplied in flat panels that can be cut, bent, or assembled on‑site to form enclosures, safety guards, or filtration screens. Panel thickness is determined by the underlying wire diameter and the PVC overcoat, allowing designers to select a configuration that balances openness with mechanical resistance.
Technical Specifications
| Property | Typical Value | Unit |
|---|---|---|
| Wire Diameter | 2.0 – 5.0 | mm |
| Aperture (Opening Size) | 25 × 25 – 100 × 100 | mm |
| PVC Coating Thickness | 0.3 – 0.8 | mm |
| Tensile Strength of Base Wire | 350 – 550 | MPa |
| Coating Adhesion (Pull‑Off) | ≥ 1.5 | MPa |
Values shown are representative of standard production runs; actual dimensions can be adjusted to meet specific project requirements such as higher wind load resistance or finer filtration thresholds.
Applications
In agricultural facilities, the mesh serves as a durable barrier for livestock pens, preventing animal intrusion while allowing ventilation and light transmission. The PVC layer protects the steel from urea‑rich environments, extending service life beyond untreated galvanized alternatives.
Industrial plants use the panels as machine guarding where impact resistance is required; the welded joints distribute forces across the grid, reducing localized deformation. The smooth PVC surface minimizes abrasion on conveyed materials and facilitates cleaning.
Construction sites employ the mesh as temporary fencing or debris netting; its lightweight nature eases handling, and the coating prevents rust stains on adjacent concrete surfaces during exposure to moisture.
Customization Options
Wire gauge can be selected from 2.0 mm up to 5.0 mm to adjust tensile capacity and opening stiffness. Aperture dimensions are programmable in increments of 5 mm, enabling precise control over particle retention or visibility.
PVC coating is available in standard colors such as black, green, and grey; custom pigments can be matched upon request to satisfy branding or camouflage needs. Coating thickness can be increased for enhanced chemical resistance in aggressive environments.
Panel dimensions are not limited to standard sheet sizes; lengths up to 3 m and widths up to 2.4 m can be produced, with custom cut‑outs or holes added for mounting hardware or service penetrations.
Quality Control
Each production lot undergoes visual inspection for weld continuity and coating uniformity. Dimensional checks are performed using calibrated gauges to verify wire diameter, aperture size, and overall panel squareness within ±0.5 mm tolerance.
Adhesion of the PVC layer is quantified via pull‑off testing on representative samples, ensuring the coating remains intact under flexural stress. Additionally, salt‑spray exposure tests are conducted to validate corrosion resistance targets for the intended service environment.
Packaging & Logistics
Panels are stacked flat on pallets with interleaving polyethylene sheets to prevent surface abrasion during transit. Edge protectors are applied to guard against impact damage, and the entire load is secured with stretch film and steel straps.
For overseas shipments, moisture‑barrier bags and desiccant packs are included to mitigate condensation risks. Standard pallet dimensions accommodate 20‑ft and 40‑ft containers, facilitating efficient handling at ports and distribution centers.
Frequently Asked Questions
- Can dimensions be customized? Yes, wire gauge, aperture size, panel length, and width can be tailored to project specifications; contact our technical team with detailed drawings or requirements.
- What information is required before quotation? Please provide desired wire diameter, opening size, PVC thickness, color, panel dimensions, and any special tolerances or certifications needed.
- How is quality inspected? Each lot receives visual weld inspection, dimensional verification, coating adhesion testing, and, upon request, salt‑spray corrosion evaluation.
- What packaging methods are available? Standard packaging includes pallet stacking with polyethylene interleaving, edge protection, and stretch‑film wrapping; custom options such as crating or container‑specific loading can be arranged.
Contact for Wholesale Inquiry
To discuss technical details, request a sample, or obtain a formal quote, please reach out via our inquiry form.