China Pvc Coated Hexagonal Wire Rabbit Netting Factory
This netting consists of hexagonal mesh formed from low‑carbon steel wire, uniformly coated with a polyvinyl chloride (PVC) layer to provide corrosion resistance and a smooth surface. The product is
PVC Coated Hexagonal Wire Rabbit Netting
This netting consists of hexagonal mesh formed from low‑carbon steel wire, uniformly coated with a polyvinyl chloride (PVC) layer to provide corrosion resistance and a smooth surface. The product is manufactured in continuous rolls, allowing straightforward installation for rabbit exclusion, poultry fencing, and garden protection.
Product Overview
The hexagonal geometry provides a high open‑area ratio while maintaining structural integrity, which reduces material usage compared to square mesh of equivalent strength. The PVC coating thickness typically ranges from 0.25 mm to 0.40 mm, depending on the required service life and environmental exposure.
Wire diameter options are available from 0.9 mm to 1.6 mm, allowing the netting to withstand tensile loads of up to 350 N per strand in standard configurations. Roll widths are commonly produced at 1.0 m, 1.2 m, and 1.5 m, with lengths customized to project needs.
Technical Specifications
| Parameter | Typical Value | Notes |
|---|---|---|
| Wire core material | Low‑carbon steel (ASTM A1008) | Grade can be adjusted per request |
| Wire diameter | 0.9 mm – 1.6 mm | Affects tensile strength and flexibility |
| PVC coating thickness | 0.25 mm – 0.40 mm | UV‑stabilized formulation available |
| Mesh aperture (hexagonal) | 25 mm × 30 mm (flat‑to‑flat) | Other sizes customizable |
| Roll width | 1.0 m, 1.2 m, 1.5 m | Custom widths up to 2.5 m possible |
| Roll length | 10 m – 50 m (standard) | Lengths tailored to project |
| Tensile strength per wire | ≥350 N (for 1.2 mm wire) | Measured per ASTM A370 |
| Coating adhesion | ≥1.5 MPa (peel test) | Ensures long‑term durability |
PVC Coating Characteristics
The PVC layer is extruded onto the heated wire, forming a continuous bond that resists cracking under temperature cycling from –20 °C to +60 °C. The formulation includes UV stabilizers and fungicidal agents to inhibit biofilm formation, extending service life in outdoor agricultural environments.
Because the coating is dielectric, the netting does not induce galvanic corrosion when in contact with aluminum posts or galvanized fasteners, a consideration often overlooked in mixed‑material fencing systems.
Typical Applications
Typical use cases exploit the netting’s combination of lightweight handling and corrosion‑resistant coating, making it suitable for both permanent and temporary installations.
- Rabbit and hare exclusion in vegetable plots, where the 25 mm aperture prevents ingress while allowing airflow and pollinator access.
- Poultry runs and aviaries, providing a lightweight barrier that resists pecking and reduces injury risk compared to welded mesh.
- Garden protection against small rodents and deer nibbling, particularly when installed at a height of 0.9 m to 1.2 m.
- Temporary construction site fencing for material containment, benefiting from the netting’s high tensile strength and ease of removal.
- Aquaculture pond liners, where the PVC coating prevents water absorption and facilitates cleaning.
Quality Control and Testing
Each production lot undergoes dimensional verification using laser micrometers to confirm wire diameter and coating thickness within ±0.02 mm. Visual inspection follows ISO 9001‑aligned criteria for surface defects such as pinholes, blisters, or uneven coating.
Mechanical testing includes tensile strength per ASTM A370 and elongation at break, ensuring the netting meets the load requirements specified in the project’s design documents. Coating adhesion is measured by a cross‑cut tape test, with acceptance criteria of ≤1 mm coating removal.
Final rolls are weighed and length‑checked; any deviation beyond ±2 % triggers a re‑run before packaging.
Customization Options
Manufacturers can tailor the netting to specific project demands by adjusting geometric, material, and additive parameters.
- Alternative mesh apertures: 20 mm, 30 mm, 40 mm (hexagonal) to suit different pest sizes.
- Wire diameter adjustments from 0.8 mm to 2.0 mm for higher load applications.
- Coating colors: standard green, black, brown, or custom RAL matches for aesthetic integration.
- Additive packages: anti‑static, flame‑retardant, or increased UV stabilization based on site conditions.
- Perforated edge reinforcement or selvage strips for easier fastening to posts.
Packaging and Shipping
Rolls are wound on corrugated cardboard cores with an inner diameter of 50 mm, then wrapped in polyethylene shrink film to protect against moisture and UV exposure during transit. Each pallet holds up to 20 rolls, secured with stretch wrap and corner boards.
Export shipments comply with ISPM‑15 standards for wooden pallets, and a fumigation certificate is provided upon request. Lead time from order confirmation to factory readiness is typically 10‑15 working days, depending on customization complexity.
Frequently Asked Questions
Below are common inquiries from procurement engineers and project managers when evaluating this product for specification.
- Can the mesh size be customized? Yes, hexagonal apertures ranging from 15 mm to 50 mm are available upon request.
- What information is needed for a quotation? Required details include wire diameter, coating thickness, roll width, length, quantity, and any special additives or color requirements.
- How is quality inspected? Incoming wire is checked for diameter and tensile strength; coating thickness is measured via magnetic induction; finished rolls undergo visual and mechanical tests as described in the QC section.
- What packaging options exist? Standard packaging uses polyethylene shrink film on cardboard cores; alternative options include wooden crates or reusable plastic totes for closed‑loop logistics.
- Are samples available? Sample sections of 1 m × 1 m can be dispatched within 3‑5 working days, with shipping costs borne by the requester.
Contact Us
For technical datasheets, sample requests, or project‑specific quotations, please reach out to our engineering team.