This product is engineered for poultry enclosures and garden perimeter protection where a balance of strength, flexibility, and corrosion resistance is required. The mesh prevents small predators from accessing chicks while allowing adequate airflow and light transmission for healthy bird development.

Manufactured from low‑carbon steel wire, the base material undergoes a drawing process to achieve consistent diameter and mechanical properties before being formed into a uniform grid.

Wire diameter options typically range from 1.2 mm to 2.0 mm, directly influencing the mesh’s load‑bearing capacity and ease of handling during installation.

Mesh opening sizes are available in square configurations such as 25 mm × 25 mm, 50 mm × 50 mm, and 75 mm × 75 mm, selected based on the size of the animals to be excluded or contained.

Tensile strength of the steel wire generally falls between 350 MPa and 450 MPa, with elongation at break around 15 % to 20 %, providing sufficient flexibility to absorb impact without permanent deformation.

These mechanical values are verified through standard tensile testing according to ISO 6892‑1 on samples taken from each production batch.

Corrosion protection is achieved either by hot‑dip galvanization or by applying a PVC coating. Galvanized coatings typically provide a zinc layer thickness of 55 µm to 85 µm, offering a service life of several years in outdoor environments.

PVC coatings, when requested, are applied to a thickness of 0.4 mm to 0.6 mm and are available in colors such as green or black to blend with garden foliage while adding an extra barrier against moisture.

Standard roll dimensions facilitate transport and on‑site deployment. Common widths are 1.0 m, 1.2 m, and 1.5 m, with lengths ranging from 20 m to 50 m per roll depending on wire diameter and mesh size.

Weight per linear meter varies from approximately 0.8 kg/m for 1.2 mm wire with 25 mm openings to about 2.5 kg/m for 2.0 mm wire with 50 mm openings, allowing easy calculation of total load for shipping.

Typical Specifications

Applications

• Poultry coop perimeter fencing to deter foxes, raccoons, and rodents
• Garden vegetable beds protection against rabbits and ground‑hogs
• Orchard tree guards to prevent bark damage from deer
• Temporary livestock separation pens for rotational grazing
• Aviary enclosures for small birds requiring ventilation and visibility

Customization Options

Buyers can specify wire diameter, mesh aperture, coating type (galvanized or PVC), roll length, and, for PVC‑coated variants, color to match site aesthetics.

All custom parameters are reviewed for feasibility before production, ensuring that the final product meets the intended mechanical and environmental requirements.

Quality Assurance

Each production lot undergoes incoming wire inspection for diameter tolerance and tensile properties, followed by in‑process checks on mesh formation and coating uniformity.

Finished rolls are subject to visual inspection for defects, dimensional verification of width and length, and coating adhesion testing (cross‑cut or pull‑off) where applicable.

Test reports are available upon request, and any non‑conforming material is segregated and reworked before shipment.

Packaging and Shipping

Rolls are wrapped in low‑density polyethylene film to protect against moisture and abrasion during handling.

Wrapped rolls are placed on pallets, secured with polyester strapping, and labeled with product code, dimensions, and weight.

For export shipments, pallets are fitted with corner protectors and stretch‑wrapped to stabilize the load, complying with ISPM‑15 standards for wooden pallets where used.

Frequently Asked Questions

• Can dimensions be customized? Yes, wire diameter, mesh size, roll width, and length can be adjusted to project specifications.
• What information is required before quotation? Required details include desired wire diameter, mesh opening, coating type, roll length, quantity, and any special packaging or labeling needs.
• What materials are available? Base material is low‑carbon steel; finishes are hot‑dip galvanized zinc or PVC coating in various colors.
• How is quality inspected? Incoming wire is tested for diameter and tensile strength; mesh is checked for uniformity; coating thickness and adhesion are verified on finished rolls.
• What packaging methods are available? Standard packaging uses polyethylene film and pallet strapping; additional options include corner boards and stretch‑wrap for export.
• How are export shipments protected? Pallets are stabilized with strapping and stretch‑wrap; wooden pallets, when used, are heat‑treated to meet ISPM‑15.
• What is the typical production lead time? Lead time varies with order size and customization but generally ranges from 2 to 4 weeks after receipt of confirmed specifications.
• How are samples arranged? Samples can be provided upon request; shipping costs are typically borne by the requester unless otherwise agreed.

For technical data sheets, custom quotes, or to discuss specific project requirements, please use the contact form below.