CE Certified Metal Wire Mesh Fence

CE certification indicates that the fence system complies with the essential health and safety requirements of relevant European directives, allowing legal placement on the EEA market. The certification process involves assessment of design, materials, and manufacturing controls against harmonized standards such as EN 10223‑3 for steel wire mesh products.

Construction and Materials

Mesh apertures are defined by the center‑to‑center distance of adjacent wires; common square openings are 50 mm × 50 mm, 75 mm × 75 mm, and 100 mm × 100 mm. Rectangular patterns (e.g., 50 mm × 100 mm) are available for specific loading or visibility requirements.

Design Specifications

Standard panel heights range from 1.0 m to 3.0 m, with widths limited to 2.5 m to facilitate handling and installation. Posts are typically C‑shaped or tubular steel sections, hot‑dip galvanized, and spaced at 2.5 m intervals for wind load distribution.

Fixing methods include welded brackets, U‑bolts, or tension wire systems that maintain panel tautness under service loads. The system accommodates ground clearance of 100 mm to 150 mm to prevent debris accumulation.

Performance Characteristics

Tensile strength of the base wire is ≥ 450 MPa, yielding a panel ultimate load capacity of approximately 12 kN per linear meter when installed with standard posts. Wind pressure resistance is verified per EN 1991‑1‑4, with panels sustaining gust speeds up to 45 m/s without permanent deformation.

Corrosion endurance is assessed via salt‑spray testing (ASTM B117); galvanized coatings exhibit less than 5 % red rust after 500 hours, while PVC‑coated variants exceed 1000 hours under the same conditions. Expected service life in rural environments exceeds 25 years with minimal maintenance.

Applications

Industrial perimeter security benefits from the fence’s high shear resistance and low climbability due to small aperture sizes, reducing unauthorized access risks. The open mesh design provides visibility for surveillance cameras while still deterring intrusion.

In agricultural settings, the fence contains livestock without causing injury; the smooth wire edges and uniform tension prevent abrasion. For construction sites, the system offers rapid deployment and re‑use, supporting temporary enclosure needs with minimal ground penetration.

Quality Assurance & Certification

Manufacturing follows ISO 9001:2015 quality management, with incoming wire inspected for diameter tolerance (±0.05 mm) and coating weight. Each batch undergoes tensile testing on a representative sample; results are recorded and traceable via lot numbers.

CE marking is affixed after verification of conformity with EN 10223‑3 and EN 13374 (temporary edge protection). Technical documentation includes design calculations, material certificates, and test reports, available to customers upon request.

Customization Options

Wire diameter can be selected between 1.8 mm and 5.0 mm to adjust load capacity. Aperture size is adjustable from 30 mm × 30 mm up to 150 mm × 150 mm, influencing both security level and material cost.

Panel height and width are customizable in increments of 0.1 m, subject to transportation limits. Post types include square tubular, C‑channel, or timber‑compatible adapters. Surface finishes comprise galvanization, PVC coating, or powder coating in RAL colors.

Gate integration options consist of single‑leaf, double‑leaf, or sliding configurations, with matching hardware and locking mechanisms provided as part of the package.

Packaging & Logistics

Panels are bundled in groups of five, secured with steel straps, and wrapped in UV‑stabilized polyethylene film to protect against moisture during transit. Each bundle is labeled with part number, quantity, and CE marking details.

Standard pallet dimensions are 1.2 m × 1.0 m, allowing efficient container loading. For overseas shipments, corner boards and moisture‑absorbent packets are added to meet ISPM‑15 requirements.

Typical Specification Ranges

Frequently Asked Questions

• Can the wire diameter and aperture be adjusted for specific security levels?

• What documentation is required to obtain a quotation for a custom fence system?

• Which coating options are available for environments with high chloride exposure?

• How is panel tension maintained over long spans?

• What are the standard lead times for production and shipping?

For detailed technical data, custom configuration assistance, or to request a formal quotation, please contact our engineering team.