Ce Certified Razor Barbed Wire Company
Razor barbed wire consists of a high-tensile steel core wrapped with sharp-edged barbs formed from flattened steel strips. The design creates a continuous barrier that resists cutting and climbing,
CE Certified Razor Barbed Wire
Product Overview
Razor barbed wire consists of a high-tensile steel core wrapped with sharp-edged barbs formed from flattened steel strips. The design creates a continuous barrier that resists cutting and climbing, suitable for perimeter security where a visible deterrent is required.
The CE marking on this product indicates conformity with the essential health and safety requirements of applicable EU directives, allowing legal placement on the European Economic Area market.
Technical Specifications
Typical dimensions and mechanical properties are outlined below; actual values can be adjusted to meet project-specific load and environmental conditions.
| Parameter | Typical Value | Unit |
|---|---|---|
| Core wire diameter | 2.5 | mm |
| Barb thickness (flattened strip) | 0.8 | mm |
| Barb length | 22 | mm |
| Barb spacing (center‑to‑center) | 100 | mm |
| Tensile strength of core wire | 450 | MPa |
| Zinc coating thickness (hot‑dip galvanized) | 55 | µm |
Material & Construction
The core wire is produced from low‑carbon steel rod, cold‑drawn to achieve the target diameter and tensile strength. After drawing, the wire is cleaned and hot‑dip galvanized to provide a zinc coating that protects against corrosion in outdoor environments.
Barbs are formed by slitting and flattening lengths of steel strip, then helically wrapping them around the core at a uniform pitch. The resulting geometry creates sharp edges that maintain their profile under impact and temperature cycling.
- Core material: low‑carbon steel (Fe ≤0.25% C)
- Coating options: hot‑dip zinc, zinc‑aluminum alloy, or PVC over‑coat for additional UV resistance
- Standard roll length: 50 m (custom lengths available)
CE Certification & Compliance
The CE mark affixed to this razor barbed wire signifies that the manufacturer has performed a conformity assessment against the relevant EU directives, primarily the Machinery Directive 2006/42/EC when the product is used as a safety component, and the General Product Safety Directive 2001/95/EC.
Technical documentation supporting the CE marking includes design drawings, material test reports, and a risk assessment that addresses hazards such as puncture, cutting, and corrosion‑induced failure.
For verification, the CE declaration of conformity can be accessed here.
Typical Applications
Razor barbed wire is selected when a high‑visibility, low‑maintenance barrier is needed to deter unauthorized crossing. Its geometry makes it difficult to cut with standard hand tools, while the tensile core resists stretching under tension.
Common installation sites include:
- Military bases and government facilities
- Correctional institutions and detention centers
- Industrial storage yards and warehouses
- Commercial property perimeters
- Agricultural fields requiring livestock containment
In each case, the wire is typically mounted on steel posts or concrete walls using tensioners, brackets, or welded straps, ensuring the barrier remains taut throughout its service life.
Quality Control & Testing
Manufacturing follows a documented quality management system aligned with ISO 9001 principles. Each production lot undergoes dimensional verification, tensile testing of the core wire, and coating thickness measurement.
Inspection items include:
- Wire diameter tolerance ±0.05 mm
- Barb length uniformity ±2 mm
- Zinc coating adherence per ISO 1461
- Visual inspection for defects such as cracks, uneven wrapping, or corrosion spots
Finished rolls are labeled with batch number, length, and CE marking before packaging.
Customization Options
To match specific project requirements, the following parameters can be adjusted:
- Core wire diameter (2.0 mm – 3.5 mm)
- Barb length and spacing
- Coating type (galvanized, Galfan, PVC‑coated, stainless steel)
- Roll length and packaging (spool, coil, palletized)
Customers seeking a tailored solution should provide the intended loading conditions, environmental exposure (e.g., salt‑spray, industrial pollutants), and any applicable regional standards.
Packaging & Logistics
Rolls are wrapped in protective polyethylene film, then placed on wooden pallets or in cardboard crates depending on order size. Each pallet is secured with stretch wrap and corner protectors to prevent shifting during transit.
Standard export packaging complies with ISPM‑15 for wooden pallets, and all shipments include a packing list, CE declaration, and material safety data sheet.
For delivery timelines, please contact our sales team with the required quantity and destination.
Frequently Asked Questions
Yes. Core diameter, barb length, spacing, and coating can be adjusted to meet project specifications.
Q: What information is required before quotation?Required details include desired length, wire diameter, barb geometry, coating type, installation environment, and any applicable standards.
Q: What materials are available?Low‑carbon steel core with hot‑dip zinc, zinc‑aluminum alloy, or PVC coating; optional stainless‑steel core for extreme corrosion resistance.
Q: How is quality inspected?Each lot undergoes dimensional checks, tensile testing, coating thickness measurement, and visual inspection per ISO 9001‑based procedures.
Q: What packaging methods are available?Polyethylene‑wrapped rolls on pallets or in crates; custom packaging upon request.
Q: How are export shipments protected?Pallets are ISPM‑15 compliant, wrapped with stretch film, and fitted with corner braces to withstand handling and transport.
Q: What is the typical production lead time?Lead time varies with order size and customization; standard items usually ship within 2–3 weeks, while customized orders may require 4–6 weeks.
Q: How are samples arranged?Samples can be dispatched upon request; shipping costs are typically borne by the requester unless otherwise agreed.
Get in Touch
For technical inquiries, quotation requests, or to discuss customization, please reach out to our engineering team.
Request a Quotation